Sometimes your computer may display an error message about sending scan to Brother FTP server. This problem can be caused by a number of reasons.
Recommended
You have write permission for your target folder.The hard drive with the specific destination folder is not full. (For example, if your hard drive is full, free up space and try again.)
I set up an online FTP store on my domain server for the sole purpose of collecting scanned images from weekly scorecards. Authentication has been possible since I was working. I was able to log into Filezilla several times. I have created a network profile in Brother, this follows
However, whenever I put a document in ADF and click the Scan button to open FTP, select the site above and hit Start, before the website even goes through ADF, the corresponding console will return to Submit Error “! “
According to the Troubleshooting section of the Scan to FTP User’s Guide, the above error indicates one of the following errors: invalid destination folder or poor access.
I can associate a take with a folder using the file transfer log user account so it doesn’t parse it as a privilege. Place of destinationThe FTP content folder must be in the root directory.
Has anyone found themselves in the same situation? Were you competent to solve the problem?
If you choose Scan to FTP, you can scan a reliable black and white or color font directly to an FTP server located on your local network or on the Internet. … The details required to implement Scan to FTP can simply be entered via the web control during preset, and the data can be saved in the Scan to FTP profile.
Recommended
Is your PC running slow? Do you have problems starting up Windows? Don't despair! Fortect is the solution for you. This powerful and easy-to-use tool will diagnose and repair your PC, increasing system performance, optimizing memory, and improving security in the process. So don't wait - download Fortect today!
NOTE: Scanning from FTP is only available after scanning from FTP profiles by age has been configured.
If color: = “” you have configured a complete password for your device’s network prompt, you must first enter the network system password in the connection area at the top of the screen to Send this. By default, there is NO password for the Brother machine’s network card.
1. Find the address of the Brother IP device in the Conf guiding the network. Type:
- Click.
- Click All Settings.
- Swipe the media UP OR DOWN or the UP OR DOWN ARROWS to view, then click Print reports.
- Swipe DOWN UP or press DOWN UP or ARROW to display, then press Network Configuration .
- Click OK. The computer network configuration list will be printed.
2. Open a web browser such as Internet Explorer and enter the IP address of your Brother machine in the form http: // XXX. XXX. XXX.XXX. (Where xxx.xxx.xxx.xxx is probably your manufacturer’s IP address. Example: http://192.168.1.104)
5. For each profile you want to edit for Scan to FTP, select FTP.
6. In the Create your own file name section, you can enter a file name, which is sometimes used as a prefix for documents scanned in voids . fields.
NOTE. A maximum of 15 characters can be linked. Delete the used field, it will be automatically replaced with the hostname.
9. Click the profile you want to change. You can customize 10 in total.
– Profile Name: This is the description you would see in the application for your Brother machine if I used the Scan to FTP / Network option.
– Host URL: this is the domain name of the FTP server you really want to connect to. Enter the device address up to 60 language characters (example: 192.23.56.189, possibly ftp.example.com)
– Name user: Enter the title that was registered on your FTP server for the device (up to 32 characters).
– Repeat new password / password: Enter the password for the FTP server (up to 24 characters)
– Storage directory: Destination folder where your document can be saved on the FTP server. (Example: Brother / abc /) (up to characters) 40 Be careful when entering item information. Undoubtedly, improper installation of the storage directory is one of the most common mistakes when scanning to FTP.
– Name file: This adds a prefix to the actual file to identify the document being viewed. You can choose from seven preset and two user-defined file names. The file name used for your document will consist of the file name you chose plus the last 6 digits of all tablet / ADF counters plus the file extension. (Example: Estimation098765.pdf) You can also manually enter a filename up to 15 characters long.
– new = “” Quality : Customers can choose a resolution Other scans in this drop-down menu. Color: = “”
– File type: You can change the format to keep the best file. The options differ depending on the selected base quality.
NOTE. If you choose SECURE PDF, the article will ask you to choose the fourth – a password with numbers before scanning. Color: = “”
If you choose SIGNED PDF, you will need to install and configure a certificate for your #keyword # using Web Based Management.
Color: = “” – Color: = “” Glass scan size: Color: = “” Select the size according to the document to scan.
– Delete Background color: You can use this function to remove the background color of the logs to make the scanned data easier to read.
– Passive mode: You set Off. or On. depending on your FTP server and network firewall configuration. By default, my setting is On. In most subareas, this parameter can be left and the default value is.
– Port number : You must change the port number used to access the FTP server. The disadvantage of this parameter is 21. In most cases, this parameter remains the default.
Color: = “” NOTE. Color: = “” Use the following characters:?, For each, or * den might cause the last submission error.
13. You will be asked: are you sure where to test? Click Yes. The device checks the buildings you entered. If families get the error, change your centered preferences using the suggestions listed after the screen and try again.
3. Press or swipe LEFT RIGHT or to display (for FTP).
4. Click (for FTP). The icon moves to the center and turns blue.
6. Swipe up or down, or press the UP, DOWN, or ARROW keys to select another of the listed FTP profiles. If the profile is not final (for example, the type was not specified), you will be prompted to enter the missing information.
7 . Click START. The LCD displays “Connecting”. If the connection to the FTP server is really successful, the machine will start scanning the document.
NOTE: if font-size: = “”> you are using scanner groove, will the LCD display the following page? . Click Yes or No. Color: = “”
If you can click Yes, download the following information and then click OK. Repeat this for each additional page.
Speed up your PC today with this easy-to-use download.
Hermano Escanear A Ftp Enviar Error
Irmao Digitalizar Para Ftp Enviar Erro
형제 스캔 Ftp 보내기 오류
Brother Scan To Ftp Send Error
Brother Scan To Ftp Send Error
Erreur De Numerisation De Frere Vers Ftp
Brother Scan To Ftp Send Error
Brat Skanirovat Na Ftp Oshibka Otpravki
Bruder Scan To Ftp Sendefehler
