Over the past few weeks, some of our users have encountered an error message while configuring snmp in Windows 2003. There are many factors that can cause this problem. Let’s discuss them below. Configure SNMP Agent and Community String on Windows 2003 Connect to a dedicated server using Remote Desktop. Click Start> Control Panel> Administrative Tools> Computer Management. Expand Services and Applications, and then immediately click Services.
Go to top | Control Panel | Add or remove programs.Select Add / Remove Windows Components.In the Windows Components window, scroll down and select Management and Monitoring Tools.Click Details.Scroll down and check the box next to Simple Network Management Protocol.
- 3 minutes to read.
This article describes how to configure the Simple Network Management Protocol (SNMP) service in Windows Server ’03. This article describes how to manage SNMP agent properties, SNMP traps and therefore security SNMP functionality.
When optimizing the agent for the SNMP service, it generates trap voice messages that are sent to the trap target when certain events occur. For example, you can configure the entire SNMP service for a conveyor belt to send when it receives a request with information that does not include each of our correct community names and does not simply match the hostname assumed to receive the service.
Configure Agent Snmp Information
Click Start, select Control Panel, Administrative Tools if necessary, and then click Computer Management.
In the console, expand Services and Applications, and then click Services.
Double click SNMP Service in the right pane.
Click the Agent tab.
Enter the exact name of the computer user or administrator in the Contact field, and then enter the physical location of the computer or contact in the specific location field.
These comments are treated as text and are optional.
In the Services”just check the boxes next to the services available on your computer. Services offered:
- Physical: Indicates whether the computer manages sexual devices such as a hard drive or a DVD partition.
- Applications: Indicates whether the computer is using programs that simply send data over TCP / IP.
- Data link and specified subnet: Whether this computer can handle a TCP / IP subnet or data link such as a large bridge.
- Internet: Indicates whether this computer is acting as an IP gateway (router).
- Pass Through: Indicates whether this computer is acting as an IP host.
Microsoft provides third-party contact documents to help you find technical momentum. These contact details are subject to change without notice. Microsoft does not guarantee the accuracy of this third-party information in general.
SNMP And Startup Communities, Trap Configuration
Click Control Panel Guide, select Administrative Tools, and then click Computer Managementm “.
In the console, expand Services in addition to Applications and click Services.
Double-click the SNMP service in the appropriate area on the right.
Click on the specific trap tab.
In the Community Name field, enter a community name, which is often case sensitive, for this computer to send trap messages, and then click Add to Success List.
Under Trap Assignments, click Add.
For most common hostnames, IP addresses, or IPXs, enter the hostname, IP address, and IPX address, and then click Add.
The hostname and address will appear in the list of trap stations. Steps
Repeat 5-7 to make sure you have added the correct communities and airports.
- Click Start, Control Panel, Administrative Tools, and then click Computer Management.
- In the console tree, expand Services, expand Applications and click Services.
- In the right window, double-click SNMP Service.
- Click the Security tab.
- Check the boxok Send Authentication Trap (if not already checked) if users want a trap message to be sent when authentication fails.
- Under Accepted Community Names, navigate to Add.
- To specify how an SNMP debt settlement node is requested from a selected region, click the desired privilege level in the Community Rights field.
- In the Community field, enter the community names of your choice, case sensitive, and then click Add.
- Specify whether SNMP packets should be accepted on the host. To do this, enter do from the following commands:
- To accept SNMP traps from any host on any of our networks, regardless of identity, click Accept SNMP Packets from Any Host.
- To reduce the reception of SNMP click packets, accept SNMP packets from these features, click Add, and then enter the exact hostname, IP address, or IPX address in the Hostname, IP Address, or IPX-address “.
- Click Add.
- Click OK.
If you delete all names, including the default Public, SNMP will not respond Add to all displayed community names.
Orchtech is a software development company with operations in several countries and around the world. The author’s experience includes several services / products such as software development offshoring / outsourcing, mobile development services, web development and mobile HR applications for internal management.
Configurar Snmp En Windows 2003
Configureer Snmp In Windows 2003
Nastroit Snmp V Windows 2003
Configurare Snmp In Windows 2003
Konfigurera Snmp I Windows 2003
Skonfiguruj Snmp W Systemie Windows 2003
Snmp In Windows 2003 Konfigurieren
Windows 2003에서 Snmp 구성
Configurer Snmp Dans Windows 2003
Configurar Snmp No Windows 2003