Sometimes your system may display an error code indicating that the tp-link tl-wps510u wireless print server is configured. This error can have several reasons.
For a better orientation, let’s assume that there really is a need for the network:
The wireless router is the center of the wireless network, and each remote computer communicates with the created TL-WPS510U through the wireless router. The local network is 192.168.1.0/255.255.255.0 and some of the required TL-WPS510U is the IP address 192.168.1.10.
On the wireless mobile phone, change the IP address of the wireless adapter to 192.168.0.11/255.255.255.0. Since the default IP address of the TL-WPS510U is 192.168.0.10, your company must set the IP address of the laptop’s wireless adapter to match the actual subnet of the print server.
Please don’t know how to change your computer’s IP address.
Connect laptop to support TL-WPS510U. Server printing will most likely work in ad-hoc mode with the default WLAN-PS SSID. Therefore, select the wireless network WLAN-PS to establish the connection. If necessary, you can reset the TL-WPS510U, But you may not know how to do this, check out the FAQ
Open a web browser and enter the IP address of the new print server (typically 192.168.0.10) into the address field of the mobile phone browser to connect to the administration system from the print server. (lowercase admin for the title and admin for the username and password to connect). Change the IP address to 192.168.1.10/255.255.255.0. TL-WPS510U will be protected and restarted after setup.
On any laptop, change the IP address of the WLAN adapter to 192.168.1.11/255.255.255.0 and reconnect with one of the ad hoc WLAN-PS networks.
Connect to TL-WPS510U and configure the wireless criteria according to your wireless network. In my example, the SSID is TP-Link_PS and the security type is WPA-PSK / AES with the password tl-wps510u12345. After configuring TL-WPS510U, you need to save and edit again.
On your laptop, change the IP address of the wireless adapter to 192.168.1.x or get any IP address automatically. And use it to connect your wireless router. As I understood in step 5, the SSID will be TP-Link_PSand the password is tl-wps510u12345.
Try ping TL-WPS510U (press WIN + R keys, advise cmd to run command carefully, stream interface, type ping 192.168.1.10) and be able to view its list on the wireless router node. This means that the TL-WPS510U can communicate with the wireless WLAN router and local clients in infrastructure mode.
After securely installing the printer on your computer, read this FAQ to add a standard TCP / IP port.
If you are unable to install the printer on your computer, see this FAQ to add a standard TCP / IP port.
Updated 06/12/2014 09:07:57 42137
For a better orientation, let’s assume that there is a demand on the network:
Multiple hubs (such as wireless routers) do not exist in a wireless group, and each client has connected to each other. Clients wishing to print a font communicate directly with TL-WPS510U. The local network is 192.168.1.0/255.255.255.0, but the required TL-WPS510U must bind its IP address to 192.168.1.10.
On your portable mobile phone, change the IP address of the WLAN adapter to 192.168.0.11/255.255.255.0. Since the default IP address of the TL-WPS510U is 192.168.0.10, you need to set the IP address of the laptop you are purchasing to the same subnet as the print server.
Click here if you don’t have the technology to change your computer’s IP address.
Connect your laptop or computer to the TL-WPS510U. The server graphics work in ad-hoc mode, with the factory standard SSID WLAN-PS. Therefore, select a WLAN-PS wireless service provider to establish the connection. If you need to reset your TL-WPS510U even if you are not sure how, please read the FAQ
Connect to TL-WPS510U and change its IP address to 192.168.1.10/255.255.255.0. TL-WPS510U saves after setup, let alone reboot.
Change the IP address of the WLAN adapter directly on your computer to 192.168.1.11/255.255.255.0 and reconnect to the ad hoc WLAN-PS network.
Connect to TL-WPS510U and configure Wi-Fi settings on your Wi-Fi network. For my husband and my example, the SSID is WLAN-Ad-Hoc, the security type is WEP-64bit and the password is set to 12345. Once configured, the TL-WPS510U will also take care of the backup and restart.
Connect laptop to TL-WPS510U using modern SSID. As I mentioned in Narration 5, the SSID is both WLAN-Ad-Hoc and the password 12345.
Try to echo the TL-WPS510U WIN (press the + R button, type cmd to launch the CLI, check the 192.168.1.10 connection) and you can also connect to the TL-WPS510U.
If you’ve just installed a printer on your computer, read this FAQ to really add a standard TCP / IP port.
If your site never installs a printer on your computer, check out this FAQ to add a standard TCP / IP port.
Is your PC running slow? Do you have problems starting up Windows? Don't despair! ASR Pro is the solution for you. This powerful and easy-to-use tool will diagnose and repair your PC, increasing system performance, optimizing memory, and improving security in the process. So don't wait - download ASR Pro today!
Are these answers to frequently asked questions helpful?
Your comments help us improve this site.
Speed up your PC today with this easy-to-use download.
How do I setup a TP-Link print server?
Step 2 Locate the icon of the installed printer, right-click and select Properties.Step 3 Click Ports -> Add Port -> Standard TCP / IP Port -> New Port -> Next.Step 4 Enter the exact IP addresses of the print server that you compiled from them.
How do I use TPS WPS510U?
On a networked laptop, change the positive IP address of the WLAN adapter to 192.168.0.Connect your laptop to TL-WPS510U.Connect to TL-WPS510U and change its IP address to 192.168.0.1.On a laptop, change the IP address of each of our WLAN adapters to 192.168.0.1.
How do I setup a wireless print server?
Connect an Ethernet cable from the production server to the computer system.In the browserre-enter the IP address of the person’s print server (default 192.168.Click Configuration> Wireless.In the Site Survey section, select the wireless network you want to connect to.Click Save and Restart.
Tp Link Tl Wps510u 무선 프린트 서버 설정
Configuration Du Serveur D Impression Sans Fil Tp Link Tl Wps510u
Configurazione Del Server Di Stampa Wireless Tp Link Tl Wps510u
Configuracao Do Servidor De Impressao Sem Fio Tp Link Tl Wps510u
Konfiguration Av Tp Link Tl Wps510u Tradlos Skrivarserver
Tp Link Tl Wps510u Draadloze Printserver Instellen
Tp Link Tl Wps510u Nastrojka Besprovodnogo Servera Pechati
Tp Link Tl Wps510u Einrichtung Des Drahtlosen Druckservers
Konfiguracja Bezprzewodowego Serwera Wydruku Tp Link Tl Wps510u
Configuracion Del Servidor De Impresion Inalambrico Tp Link Tl Wps510u