How To Control Winamp Playback?


If you see Winamp message, the following user guide might help you.


  • 1. Download Fortect
  • 2. Follow the on-screen instructions to run a scan
  • 3. Restart your computer and wait for it to finish running the scan, then follow the on-screen instructions again to remove any viruses found by scanning your computer with Fortect
  • Speed up your PC today with this easy-to-use download.

    ReplayGain is a standard designed for measuring or positively comparing the volume of digital and analog audio files. This metadata allows audio clip players and audio systems that support ReplayGain to automatically adjust the volume to the desired level.

    ReplayGain is a standard for checking or comparing the volume of automatic audio files. This metadata is provided by audio players and audio systems, which in particular support ReplayGain, to automatically adjust the appropriate volume to the desired level.



    To apply ReplayGain (RG) WA to your own music files, right-click one or more selected songs in your library or playlist and choose Calculate Play Gain from the Submit menu. Some Winamp skins (user interfaces) provide additional options for choosing the RG calculation. The calculated RG values ​​are probably stored in special file tags. These tags can only be understood based on music players that recognize this particular implementation. The actual sound will most likely remain unchanged. DunnThe numbers in these phrases are used to control the overall volume because they represent the song. Officially supported file configurations: WMA, mp3, WMV, AAC, MP4, M4A, OGG and FLAC. The wavpack (WV) format is also supported if the wavpack decoder (contained in some Winamp Essentials package) is installed.

    The RG calculation determines the peak value found in each song. The peak value is used in conjunction with the recording (song) and album value adjustment to achieve a certain target dB level, most of which will control the overall volume without the need for clipping. The relatively low target for total usable dB is unlikely to be published and cannot be changed. The final overall volume may seem lower than it should be, but this “safe” dB level can be easily compensated for by increasing the master volume control on your excellent device and / or connecting the Replay Gain preamp (see below – below) / p>
    winamp replay

    The value of album information lies in maintaining many of the relative loudness differences between songs as they appear.they appear in a live album. To use it correctly, it is best to choose songs that are far from the same album when you run the RG calculation and make sure the album label is correct in that version. If the file pick tag is empty, the value is calculated, not the market price. Tracks are always calculated, even if the files do not actually contain tags.

    If you choose “Save to Album” when saving my RG calculation results, the most important album and track values ​​will be saved. You can use this solution any minute. The primary preference for WA developers is to use “Just Save Because Album.” If you choose Save Curve As Your Data, the RG calculation will return only the curve values. I recommend using this option when clients have included songs from different frames in one RG calculation. You can repeat RG’s calculations at any time (if you decide to finally group the selected songs by album, add your favorite RG albums later).

    The use of RG WA beacons is enabled / disabled via Generale parameters – Reading – Read amplification options. The remaining 8 options for general page settings:

    Gain Mode:

    By default, the “Apply gain / prevent clipping” option is selected (recommended by the WA developers). This would probably balance the overall loudness and thus prevent distortion. There are usually three other options available: Apply Gain, Prevent Clipping, and then Normalize. These are suboptimal ways to use RG. Applying amplification alone can result in clipping. Clipping prevention by itself is not intended to compensate for sustained loudness. Normalization makes a constant set of “adjustments” to achieve a certain target dB level and can lead to clipping. Normal RG uses values ​​that vary with “correction” to achieve the receiver level in dB.

    Preferred source:

    Select Track (by default, every track in songs will play at the same level, even if it’s from the same album) or perhaps even Album (songs and in one file will save the relative volume on different versions, if any).

    Disable if preferred source is not considered available:

    Disables RG if, for example, the reason “Album” is selected, but clean Track tags are available.

    Correction for files without RG: without

    RG tags (default is typically -6.0 dB). -6.0 dB was considered the chosen average for a good music range and was considered correct for the target dB level used by the RG WA. I recommend increasing and decreasing this value to 0 and rephrasing it if necessary when playing RG-tagged mixed music with non-RG-tagged users.

    Replay Gain Preamp:

    Selection preamp for setting the overall sound for all files

    with or possibly without

    RG tags (default 4 dB). This

    is not profitable

    is taken into account by RG scores. This can be useful when media streaming is very dense or very noisy (always be prepared to manually adjust the weight). This boost can also come in handy when you feel that the overall volume level of the RG in WA is on the saactually quiet. Use this preamp (and the previous # 4 option) with care, it can work against what you are trying to achieve with the RG.

    Ask to record playback gain for viewing files:
    winamp replay

    If the option is activated, a window with conclusions for RG calculation is displayed in the calculation part. If disabled, scrollable headers and (if applicable) values ​​are automatically saved without prompting. WA always displays a window that confirms the progress of the calculations.

    Request each album after scanning: Please analyze multiple files:
    winamp replay

    Request to save all values ​​after checking all files.


    Is your PC running slow? Do you have problems starting up Windows? Don't despair! Fortect is the solution for you. This powerful and easy-to-use tool will diagnose and repair your PC, increasing system performance, optimizing memory, and improving security in the process. So don't wait - download Fortect today!

  • 1. Download Fortect
  • 2. Follow the on-screen instructions to run a scan
  • 3. Restart your computer and wait for it to finish running the scan, then follow the on-screen instructions again to remove any viruses found by scanning your computer with Fortect

  • In the media, the library cd trim options are another solution related to RG, “Automatically calculate playback gain”. This enables / disables the automatic calculation option and the computer software of the RG values ​​in the extracted computer files. This is a hidden procedure that occurs at the end of each track. Default behaviorIt can be described using an album and track tag cloud. Please note that enabling this option has the potential to significantly slow down the entire shipping process.

    Undo (restore the original volume of songs) is easy. Just turn off the use of WA RG offers. Alternatively, the WA Tag Editor can be used to remove RG tags from files that often use the vorbis markup standard (like flac). Third party taggers must be purchased to remove RG tags from documents that use other markup methods (like mp3 id3) and can be used to remove pre-RG tags.

    Are you still using mp3? Yes, skip to part 3. No, start using WAs RG and stop skipping over the volume slider.



    Speed up your PC today with this easy-to-use download.

    How to use ReplayGain in Winamp?

    To apply ReplayGain (RG) WA to your music files, right-click one or more selected songs in your library (this could be a list ofPlayback Ok) and select “Calculate Playback Gain” from the “Submit” menu. Some Winamp peels (user interfaces) offer additional options for purchasing calculus RG.

    How does ReplayGain work?

    ReplayGain first performs a psychoacoustic survey of the entire audio track or version to measure peak level and perceived loudness. The difference between the measured apparent volume and the desired target volume is now calculated; this is considered the most desirable display gain value.

    What is ReplayGain mode?

    ReplayGain allows you to match the volume associated with each song in the song collection. This is the strengthening of the path. It also allows the volume assigned to a particular sub-collection (“album”) to match the rest of the specification while maintaining song-to-song dynamics in the album.




    Replay Di Winamp
    Rejouer Winamp
    Winamp Replay
    윈앰프 리플레이
    Winamp Wiedergabe
    Winamp Repris
    Replay Winamp
    Vosproizvedenie Winamp
    Repeticion De Winamp
    Powtorka Z Winampa