Recently, some readers have encountered a known bug called “Error 41.3” Unexpected size in Tray 1 “. This problem occurs due to a number of factors. We will talk about this below.
Recommended
Display: 41.3 UNEXPECTED SIZE IN TRAY 1 Description: You have configured Tray 2 for a different paper size than required for the print job. NOTE. This error can be caused by a multiple data issue. Open and close the nicotine cartridge door to clear the error message.
Finally found this problem. When you need to access your computer, right-click on the icon for the actual printer. For me, it’s usually justHP 2800 MFP series, then click printer properties, then gear setting, then change Tray 2 paper sizes to Letter.
Don’t think about the reasons why onboard printers can’t set this up on their own. If you don’t, stick to A4 size, you will recognize the image below. Good luck !. 
- Code: 41,3
- Advertising: UNEXPECTED 41.3 FORMAT IN TRAY 1
- Description: You have configured Tray 1 for a specific paper size other than that normally required for print jobs. This is a note: the error could very well be caused by a multi-feed issue. Then open and close the cartridge door to clear the error message. If the error persists and the bed is installed correctly, try cleaning the Truck Bed 1 roller (or you may need to replace the roller withhalf).
- Remedy: Reload the correct size paper in the paper tray. If the compartment is the correct size, the product will ask you to press the OK button to use a different compartment.
- Code: forty one. 3
- Display: UNEXPECTED 41.3 V FACH
- Description: You have configured this tray for a paper size other than that required for the print job. This is a note: the error can be caused by a multifeed issue. Open and close the cartridge mailbox to clear the error message. If the problem persists and the grip is set correctly, try the Tray 1 Pick Roller (or some of the rollers may need to be replaced in your area).
- Remedy: 1. Load a standard size tray in the tray. 2. Make sure the amount shown is the same in all software, from the printer driver to the control panel. 3. Click the OK link to go to TRAY
= . Resize them in the basket to fit the size you needrequired for publication. 4. If the error persists, turn on the product separately and then turn it back on. 5. If this message persists, contact an authorized HP company or support.
Format
| Service Manual | |
| Error code | |
| Spare parts catalog | |
| Compatibility | |
| Home |
The Reason Is Related To Error Code 41.3 UNEXPECTED PAPER SIZE
The monitored printer has a different media size than expected. This usually happens simply because two or more sheets of paper are stuck together in the press, or the tray is installed correctly and securely.
Solving The Problem Of Error Coding 41.3 UNEXPECTED PAPER SIZE
1. Fill the container with the correct type of media. 2. Make sure the media is loaded in the slot under the front and rear clips. 3. Е If you are printing from Tray 12, make sure the correct paper size is selected in the built-in controller. 4. If you are printing from Tray 2, 3, or 4, check the paper size settings (nib length guide, width guide, size selector) and how the paper tray is designed for them. Make sure the bracket matches the angle registers. 5. After following the above steps, press GO. Autopilot reprints the error page when Jam Recovery is enabled. and 4100 series, there may be wrong paper feed layout automatically. In the case of EX motor printers, this is undoubtedly an error caused by a faulty PIU (Paper Input Unit).
Recommended
Is your PC running slow? Do you have problems starting up Windows? Don't despair! Fortect is the solution for you. This powerful and easy-to-use tool will diagnose and repair your PC, increasing system performance, optimizing memory, and improving security in the process. So don't wait - download Fortect today!
Speed up your PC today with this easy-to-use download.
Why does my printer keep saying unexpected paper size?
The extra time it takes to get my sheet of paper makes the new product “believe” that a ring of paper pulled out of tray one or two is actually longer than it can be. Depending on the additional number of days it took to load the laundry, the product may become stuck and / or have an unexpected sizing error.
Why does my HP printer say load tray 1?
If the main printer asks for booth 1 to be loaded, it means that the size or type of paper requested by the print job does not necessarily match what the print service suspects in each of our trays.
How do I fix unexpected paper size in tray 2?
Solutions: Eliminate blocked media marketing. Verify that the report bucket (s) are configured correctly using the product control panel or, if necessary, the Embedded Web Server. For example, if you loaded Legal size paper in Tray 2, make sure Tray 2 is Legal.
Fehler 41 3 Unerwartete Grosse In Fach 1
Errore 41 3 Formato Imprevisto Nel Vassoio 1
Fout 41 3 Onverwachte Grootte In Lade 1
Erreur 41 3 Taille Inattendue Dans Le Bac 1
Erro 41 3 Tamanho Inesperado Na Bandeja 1
Fel 41 3 Ovantad Storlek I Fack 1
Oshibka 41 3 Neozhidannyj Razmer V Lotke 1
오류 41 3 용지함 1의 예기치 않은 크기
Blad 41 3 Nieoczekiwany Rozmiar W Podajniku 1
Error 41 3 Tamano Inesperado En La Bandeja 1
