Steps To Fix PC Freezes When Loading BIOS

Posted on by

Recommended

  • 1. Download Fortect
  • 2. Follow the on-screen instructions to run a scan
  • 3. Restart your computer and wait for it to finish running the scan, then follow the on-screen instructions again to remove any viruses found by scanning your computer with Fortect
    • Speed up your PC today with this easy-to-use download.

    Hope this user guide can help you if you notice your computer freezes while starting up the BIOS.

    If the computer freezes in BIOS, check the hard drives, try to boot from USB, if still not working, plug in the hard drive, then see if the problem persists, remove the RAM and reinstall it. it’s in place. program, if the problem was in the RAM, buy a new UDIMM. RAM does not usually work with DIMMs, so be careful when

    Sometimes your computer turns on honestly, but the error principle during Power On Self Test (POST) stops the startup process . In other cases, your computer may freeze without error during POST. Perhaps your site will only see the car manufacturer’s logo on your computer.

    There are a number of BIOS error messages that can appear on this monitor and several reasons why another computer might freeze during POST.

    scallopsmaxim / Getty Images

    Time required: From a few minutes to long periods of time, depending on the reason the computer POST during startup.

    How To Fix Shutdown, Freeze And Restart Problems During POST

    What to do if PC freezes in BIOS?

    1. Usually, the cause of the BIOS error message appearing on the computer screen is eliminated. These POST errors turned out to be very specific. So, if you are lucky enough to get at least one, your best bet is to fix the various errors that you see.

      If you do not resolve the issue by resolving the error displayed during POST, you can also come back here and continue troubleshooting below.

    2. Disconnect all gardening tools from the USB drive and remove all discs from all optical drives . If your laptop or desktop computer tries to boot from this location, which does not require boot data, your computer might freeze somewhere during POST.

      If this approach works, make sure you completely reverse the boot order and make sure your preferred boot device, possibly your own hard drive, is listed before “USB or Other Sources”.

  • Clear CMOS . Removing the BIOS memory on your favorite motherboard will reset the BIOS settings to factory defaults. Incorrectly configured BIOS is a common cause of computer crashes during POST.

    If CMOS will fix your problem, make temperature changes in BIOS at the right time. If the problem persists, you will know which change caused the problem.